Robot Chassis RP 5 Tracked + Rotary Encoder
Item No. RB0601001
Item No. RB0601001
Harga: 1.100.000
1. Descriptions :
This durable tracked chassis is a complete robot base for your tank-like robot. With a battery holder, two DC motors, and two independent geared drive trains included, this chassis is just a robot controller and some sensors away from a complete robot. This chassis is gray.
The RP5 tracked chassis is a mobile robot platform that uses caterpillar treads to drive over a variety of surfaces, turn in place, and smoothly handle small bumps and obstacles. Simply connect a robot controller or motor controller to the included 6-AA battery holder (AA batteries sold separately) and two DC motors to get the platform moving.
The chassis features a durable gray or yellow plastic body with room to house the included battery holder and some additional electronics, rubber treads for tackling uneven surfaces, and powerful motors that are strong enough to lift its own weight and let it achieve speeds as high as 6 in/s (15 cm/s). The outer dimensions of the chassis are approximately 7" long, 5.5" wide and 2.5" tall. One of the gears in each drive train has a hole that can be used for tracking motor rotation with a resolution of 4 counts per output shaft revolution, which corresponds to linear distance of about 1.5 inches.
2. Specifications :
* Rotary encoder sensor
* durable plastic body
* 6-AA battery holder included
* two brushed DC motors with 210 mA free run and 2.4 A stall current at 7.2 V
* maximum speed of 6 in/s (15 cm/s) at 7.2 V
* ability to scale inclines limited only by friction
* dimensions: 7" x 5.5" x 2.5" (18 x 14 x 6 cm)
* weight: 15 oz (425 g)
3. Samples when using :
1. Descriptions :
This durable tracked chassis is a complete robot base for your tank-like robot. With a battery holder, two DC motors, and two independent geared drive trains included, this chassis is just a robot controller and some sensors away from a complete robot. This chassis is gray.
The RP5 tracked chassis is a mobile robot platform that uses caterpillar treads to drive over a variety of surfaces, turn in place, and smoothly handle small bumps and obstacles. Simply connect a robot controller or motor controller to the included 6-AA battery holder (AA batteries sold separately) and two DC motors to get the platform moving.
The chassis features a durable gray or yellow plastic body with room to house the included battery holder and some additional electronics, rubber treads for tackling uneven surfaces, and powerful motors that are strong enough to lift its own weight and let it achieve speeds as high as 6 in/s (15 cm/s). The outer dimensions of the chassis are approximately 7" long, 5.5" wide and 2.5" tall. One of the gears in each drive train has a hole that can be used for tracking motor rotation with a resolution of 4 counts per output shaft revolution, which corresponds to linear distance of about 1.5 inches.
2. Specifications :
* Rotary encoder sensor
* durable plastic body
* 6-AA battery holder included
* two brushed DC motors with 210 mA free run and 2.4 A stall current at 7.2 V
* maximum speed of 6 in/s (15 cm/s) at 7.2 V
* ability to scale inclines limited only by friction
* dimensions: 7" x 5.5" x 2.5" (18 x 14 x 6 cm)
* weight: 15 oz (425 g)
3. Samples when using :
